Filter
Top Products
Black plate (192,1)
Model "R35-D" EDITED: 2009/ 3/ 11
Never shi ft to the &
P
or &
A
↔&
M
position while the vehicle is moving
rearward. Doing so could cause loss
of control and an accident.
. The shift lever contains a powerful
magnet. Do not place electronic
medical devices or other electronic
products that are susceptible to
magnetic force close to the shift
lever.
. Do not drive, accelerate or decele-
rate with both the accelerator pedal
and brake pedal depressed at the
same time. Doing so may damage
the transmission. Also at low
speeds, the engine may stop, possi-
bly causing an accident.
CAUTION
. Do not downshift abruptly on slip-
pery roads. This may cause a loss of
control.
. Because the vehicle includes a dual
clutch transmission that automati-
cally controls the clutch and shifting
operation of the manual transmis-
sion, whenever the shift lever is in a
position other then
&
P
or &
N
, the
vehicle will begin to move slowly, in
the same way as when the clutch in
a manual trans mission vehicle is
partially engaged. Keep the brake
pedal firmly depressed when the
vehicle is stopped. In some circum-
stances the vehicle may not start
moving on its own, however this
does not indicate that there is a
malfunction.
NOTICE
When the vehicle is stopped on a hill,
do not hold the vehicle in place by
depressing the accelerator pedal. Doing
so may cause the clutch to overheat and
result in transmission damage. Use the
brakes to prevent the vehicle from
moving.
Operating the shift lever
After starting the engine, fully depress the brake
pedal and move the shift lever from the
&
P
position to the &
R
, &
N
,or&
A
↔&
M
position. Push
the button to shift into the
&
P
or &
R
position. All
other positions can be selected without pushing
the button.
5-14 Starting and driving