Filter
Top Products
Black plate (277,1)
Model "R35-D" EDITED: 2009/ 3/ 11
CHECKING THE TIRE PRESSURE
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely onto
the valve stem. Do not press too hard or
force the valve stem sideways, or air will
escape. If the hissing sound of air
escaping from the tire is heard while
checking the pressure, reposition the
gauge to eliminate this leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge
stem and compare it to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as needed. If too
much air is added, press the core of the
valve stem briefly with the tip of the
gauge stem to release pressure. Re-
check the pressure and add or release
air as needed.
6. Install the valve stem cap.
7. Check the pressure of all other tires,
including the spare.
NOTE:
. You can check the pressure of all
four tires on the multi function
display. See the separate Multi
Function Display Owner’s Manual.
. The tires of this vehicle are filled
with nitrogen gas. When the tire
pressure is low, fill the tires with
nitrogen. Contact a GT-R certified
NISSAN dealer for information on
filling the tires with nitrogen.
. If nitrogen is not available, com-
pressed air may be safely used
under normal driving conditions.
However, NISSAN recommends re-
filling with nitrogen for maximum
tire performance.
Summer tires:
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
255/40ZR-
F20 (97Y)
29 PSI
(200 kPa)
REAR
ORIGINAL
TIRE
285/35ZR-
F20 (100Y)
29 PSI
(200 kPa)
All-season tires:
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
255/40R-
F20 97W
29 PSI
(200 kPa)
REAR
ORIGINAL
TIRE
285/35R-
F20 100W
29 PSI
(200 kPa)
Maintenance and do-it-yourself 8-31