Filter
Top Products
Black plate (131,1)
Model "R35-D" EDITED: 2009/ 3/ 11
The seat heaters can be used when the ignition
switch is in the ON position. The front seats are
warmed by the built-in heaters.
TURNING ON THE HEATERS
Press the switch to activate the heaters. The
switch indicator illuminates.
Switch position Function
HI To heat the seat quickly
LO
To keep the seat warm
TURNING OFF THE HEATERS
Driver’s seat
Move the switch to the level position. The switch
indicator turns off.
Passenger’s seat
Press the switch again for the side where the
heater is operating. The switch indicator turns
off.
NOTE:
When the ignition switch is set to the OFF
position while the passenger’s seat heater
is operating, the heater switch will auto-
matically return to the OFF position. Oper-
ate the passenger’s side seat heater switch
to turn on the seat heater again.
CAUTION
. Do not put anything on the seat
which ins ula tes he at, suc h as a
blanket, cushion, seat cover, etc.
Otherwis e, the seat may become
overheated.
. Do not place anything hard or heavy
on the seat or pierce it with a pin or
similar object. This may result in
damage to the heater.
. Any liquid spilled on the heated seat
should be removed immediately
with a dry cloth.
. If any malfunctions are found or the
heated seat does not operate, turn
the switch off and have the system
checked by a GT-R certified NISSAN
dealer.
NOTICE
. The battery could run down if the
seat heater is operated while the
engine is not running.
. Do not use the seat heater for
extended periods or when no one
is using the seat.
. When cleaning the seat, never use
gasoline, thinner, or any similar
materials.
Instruments and controls 2-51
HEATED SEATS (if so equipped)