Nissan 2010 GT-R Sports Sedan Automobile User Manual


 
Black plate (140,1)
Model "R35-D" EDITED: 2009/ 3/ 11
There is an illuminated vanity mirror on the
reverse side of the sun visor.
HomeLink
®
Universal Transcei ver provides a
convenient way to consolidate the functions of
up to three individual hand-held transmitters into
one built-in device.
HomeLink
®
Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates, home
and office lighting, entry door locks and
security systems.
. Is powered by your vehicle’s battery. No
separate batteries are required. If the
vehicle’s battery is discharged or is dis-
connected, HomeLink
®
will retain all pro-
gramming.
Once HomeLink
®
Universal Transceiver is
programmed, retain the original transmit-
ter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink
®
Universal Transceiver buttons
should be erased for security purposes.
(
“PROGRAMMING HomeLink
®
page
2-60)
WARNING
. Do not use HomeLink
®
Universal
Transceiver with any garage door
opener that lacks safety stop and
reverse featu res as req uired by
federal safety standards. (These
standards became e ffective for
opener models manufactured after
April 1, 1982.) A garage door opener
which cannot detect an object in the
path of a closing garage door and
then automatically stop and reverse,
does not meet current federal safety
standards. Using a garage door
opener without these features in-
creases the risk of serious injury or
death.
. During programming procedure,
your garage door or security gate
may open or close. Make sure that
people and objects are clear of the
garage door, gate, etc. that you are
programming.
. Your vehicle’s engine should be
turned off while programming
HomeLink
®
Universal Transceiver.
PROGRAMMING HomeLink
®
To program your HomeLink
®
Transceiver to
operate a garage door, gate, or entry door
opener, home or office lighting, you need to be
at the same location as the device. Note:
Garage door openers (manufactured after
1996) have “rolling code protection”. To pro-
2-60 Instruments and controls
VANITY MIRROR LIGHTS
HomeLink
®
UNIVERSAL
TRANSCEIVER