Filter
Top Products
REPLACING
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
᭺
2
Push the release tab, then move the wiper
blade down the wiper arm to remove.
᭺
3
Remove the wiper blade.
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
5. Rotate wiper blade so the dimple is in the
groove.
6. Return the wiper to its original position and
release it until it has made contact with the
windshield.
CAUTION
● After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
● Make sure the wiper blades contact the
glass; otherwise the arms may be dam-
aged from wind pressure.
If you wax the surface of the hood, be careful not
to let wax get into the windshield–washer nozzle
᭺
A
. This may cause clogging or improper wind-
shield–washer operation. If wax gets into the
nozzle, remove it with a needle or small pin
᭺
B
.
WDI0594
WDI0570
8-18 Maintenance and do-it-yourself