Filter
Top Products
iPodா* PLAYER OPERATION WITH
NAVIGATION SYSTEM (if so
equipped)
Connecting iPodா
To connect an iPodா to the vehicle so that the
iPodா can be controlled with the audio system
controls and display screen, use the USB jack
located in the center console. Open the protec-
tive cover
᭺
1
on the USB jack in the center
console. Then connect the iPodா-specific end of
the cable to the iPodா and the USB end of the
cable tothe USBjack onthe vehicle.If youriPodா
supports charging via a USB connection, its bat-
tery will be charged while connected to the ve-
hicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPodா can
only be operated by the vehicle audio controls.
Todisconnect the iPodாfrom the vehicle, remove
the USB end of the cable from the USB jack on
the vehicle, then remove the cable from the
iPodா.
*iPodா is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are available:
● iPodா 5th Generation version 1.2.1
● iPodா Classic - version 1.1.1
● iPodா Touch - version 2.0.0
● iPodா Nano - 1st generation version 1.3.1
● iPodா Nano - 2nd generation version 1.1.3
● iPodா Nano - 3rd generation version 1.1
● iPodா Nano - 4thgeneration version 1.0.2
Make sure that your iPodா firmware is updated.
Audio main operation
Place the ignition switch in the ACC or ON
position. Press the DISC·AUX button repeatedly
to switch to the iPodா mode.
If the system has been turned off while the iPodா
was playing, pressing the VOL/ON·OFF control
knob will start the iPodா.
LHA1357 LHA1397
4-68 Monitor, climate, audio, phone and voice recognition systems