Filter
Top Products
Use the Recent Calls command to access out-
going, incoming or missed calls.
“Outgoing”
᭺
A
Use the Outgoing command to list the outgoing
calls made from the vehicle.
“Incoming”
᭺
B
Use the Incoming command to list the incoming
calls made to the vehicle.
“Missed”
᭺
C
Use theMissed commandto listthe callsmade to
the vehicle that were not answered.
“Connect Phone”
NOTE:
The Add Phone command is not available
when the vehicle is moving.
Main Menu
“Connect Phone”
“Add Phone”
᭺
A
“Select Phone”
᭺
B
“Delete Phone”
᭺
C
“Turn Bluetooth OFF”
᭺
D
Use the Connect Phone commands to manage
the phonesconnecting to thevehicle or toenable
the Bluetoothா function on the vehicle.
“Add Phone”
᭺
A
Use the Add Phone command to add a phone to
the vehicle. See “Connecting procedure” in this
section for more information.
“Select Phone”
᭺
B
Use the Select Phone command to select from a
list of phones connected to the vehicle. The sys-
tem will list the names assigned to each phone
and then prompt you for the phone you wish to
select. Only one phone can be active at a time.
“Delete Phone”
᭺
C
Use the Delete Phone command to delete a
phone that is connected to the vehicle. The sys-
tem will list the names assigned to each phone
and then prompt you for the phone you wish to
delete. Deletinga phone from thevehicle will also
delete that phonebook for that phone.
“Turn Bluetooth OFF”
᭺
D
Use theTurnBluetooth OFFcommand to prevent
a wireless connection to your phone.
SPEAKER ADAPTATION (SA) MODE
Speaker Adaptation allows up to two out-of-
dialect users to train the system to improve rec-
ognition accuracy. By repeating a number of
commands, theusers cancreate avoice modelof
their own voice that is stored in the system. The
system is capable of storing a different speaker
adaptation model for each connected phone.
Training procedure
The procedure for training a voice is as follows.
1. Position the vehicle in a reasonably quiet
outdoor location.
2. Sit in the driver’s seat with the engine run-
ning, the parkingbrake on, and the transmis-
sion in P (Park).
3. Press and hold the
button for more
than 5 seconds.
4. The system announces: “Press the
PHONE/SEND (
) button for the
hands-free phone system to enter the
speaker adaptation mode or press the
PHONE/END (
) button to select a dif-
ferent language.”
Monitor, climate, audio, phone and voice recognition systems 4-97