Nissan 2010 Automobile User Manual


 
6
CRUISE CONTROL
To activate the cruise control, push the ON/OFF switch. The
CRUISE indicator light in the instrument panel will illuminate.
To set cruising speed, accelerate the vehicle to the desired
speed, push the COAST/SET switch and release.
To reset at a faster cruising speed, push and hold the
ACCEL/RES switch. When the vehicle attains the speed
you desire, release the switch.
To reset at a slower cruising speed, push and hold the COAST/
SET switch. Release the switch when the vehicle slows to the
desired speed.
To cancel cruise control, push the CANCEL switch or tap the brake pedal. The CRUISE
indicator light in the instrument panel will go out.
To resume a preset speed, push and release the ACCEL/RES switch. The vehicle returns to
the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).
To turn off cruise control, push the ON/OFF switch. The CRUISE indicator light in the
instrument panel will go out.
AUTOMATIC CLIMATE CONTROLS
01
DRIVER’S SIDE TEMPERATURE CONTROL DIAL/AUTO MODE
Press the driver’s side temperature control dial
01
. Turn the driver’s side temperature control
dial
01
to the desired temperature. AUTO and the selected temperature will be displayed
on the left side of the vehicle information display or the navigation display (if so equipped).
This will allow the fan speed, air flow distribution and temperature to be automatically
maintained at the selected temperature.
02
PASSENGER’S SIDE TEMPERATURE CONTROL DIAL/DUAL MODE
Press the passenger’s side temperature control dial
02
to turn the passenger’s side
temperature controls on or off. This will allow the passenger’s side temperature to be
adjusted independently from the driver’s side control by turning the passenger’s side
temperature control dial. DUAL and the selected passenger temperature will be displayed
on the right side of the vehicle information display or the navigation display (if so equipped).
01 02
03
04
0506
07
08
09