Filter
Top Products
CONNECTING PROCEDURE
NOTE: The vehicle must be stationary when connecting the phone.
1. Press the
button on the steering wheel. The system announces the available commands.
2. Say “Connect Phone.”
3. The system acknowledges the previous command and announces the next set of available
commands. Say “Add phone.”
4. Initiate connecting from the phone.
The connecting procedure varies according to each cellular phone model. For detailed
connecting instructions and a list of compatible phones, please visit
www.nissanusa.com/bluetooth.
When prompted for a Passkey code, enter “1234” from the handset. (The Passkey code is
assigned by NISSAN and cannot be changed.)
5. Say a name for the phone when the system asks you to provide one. You can give the phone
a name of your choice.
MAKING A PHONE CALL
1. Press the
button.
2. After the tone, do one of the following:
Say “Call.” After the system responds, say the name of the person in the phonebook.
Say “Call Phone Number.” After waiting for the tone, say [number]. For example, say
“Call Phone Number.” After waiting for the tone, say “123-456-7891.”
Say “Redial” to redial the previous phone number.
Say “Call Phone Number.” After the system responds, say “Special Number” to dial more
than 10 digits or special characters.
You can say all the digits of a 7- or 10-digit phone number at one time.
For a 10-digit number, saying the phone number in groups of 3, 3 and 4 digits may improve
recognition for some speakers. To use this group dialing method, say only the first 3 digits
of the phone number. After the system recognizes the number, it will request the next 3
digits and finally the last 4 digits.
If a phone number is incorrectly recognized, you can try entering the phone number again
using the 3–3–4 group dialing procedure by saying “Correction.”
When you have finished speaking the phone number wait for the system to repeat it back to
you, then say “Dial.”
RECEIVING/ENDING A PHONE CALL
When you receive a phone call, a ring tone sounds through the audio system.
To accept the call, press the
button. To reject the call, press the button.
To hang up the phone at the end of a call or to disconnect during call placement, press
the button.
23