Filter
Top Products
18
MOONROOF CONTROLS (if so equipped)
The ignition switch must be in the ON position to operate the
moonroof controls.
SLIDING SUNSHADE AND MOONROOF
When the moonroof switch is pushed to the OPEN position
02
, the front and rear sunshades will fully open. When the
switch is pushed again, the moonroof will fully open.
When the moonroof switch is pushed to the CLOSE
position
04
, the moonroof will automatically close. Push
the switch again, the front and rear sunshades will close.
When the moonroof switch is pushed to the second detent
to the OPEN position
01
or CLOSE position
05
, both
the sunshades and moonroof will open or close.
To stop the sunshades or moonroof during the operation, push the moonroof switch to the
OPEN
02
, CLOSE
04
or PUSH TILT
03
positions.
TILTING MOONROOF
To tilt the moonroof up, push the moonroof switch to the PUSH TILT position
03
.
To tilt the moonroof down, push the switch to the PUSH TILT position
03
or push the
switch to the CLOSE position
04
.
When the moonroof is tilted up, push the moonroof switch to the second detent to the
CLOSE position
05
, the moonroof will tilt down and the sunshades will close.
POWER LIFTGATE (if so equipped)
To open, close or reverse the liftgate, the transmission lever must be in the
P (PARK) position. The power liftgate can be activated by:
Pushing the power lift gate button on the keyfob for more than 1.5 seconds.
Pushing the power lift gate switch on the instrument panel.
Pushing the lift gate opener switch.
The main POWER DOOR ON/OFF switch
A
must be on to close the lift gate with the rear pillar
button
B
.
A
B
01
02
03
04
05