Filter
Top Products
14
VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH
The Vehicle Dynamic Control (VDC) system monitors driver inputs and vehicle
motion. Under certain conditions, it controls braking and engine output to
help the driver in handling the vehicle. VDC does not prevent accidents
due to careless or dangerous driving techniques. Always be mindful of
vehicle speed and driving conditions. VDC may need to be temporarily
shut off if you are trying to free a vehicle stuck in snow or mud.
Push the Vehicle Dynamic Control (VDC) OFF switch to deactivate the
VDC system. The
light will illuminate in the instrument panel gauge area.
Push the Vehicle Dynamic Control (VDC) OFF switch again to activate the VDC system.
The
light will turn off in the instrument panel gauge area.
The VDC system is active while the vehicle is running, until the switch is pushed to turn off.
AUTOMATIC DRIVE POSITIONER (if so equipped)
The automatic drive positioner system has two features:
Memory storage function.
Entry/exit function.
MEMORY STORAGE FUNCTION
Two positions for the driver’s seat, steering column and outside mirrors can be stored in the
automatic drive positioner memory. Follow these procedures to set driver’s preferences.
SET THE DESIRED POSITIONING
1. Set the shift lever to the P (PARK) position.
2. Turn the ignition on and adjust the driver’s seat, steering column and outside mirrors to the
desired positions.
3. Press the SET (memory) button and within 5 seconds press the position button (1 or 2)
until the indicator light illuminates. The position is now stored in memory.
LINK TO KEYFOB
Within 5 seconds of setting the memory position (indicator light is on and ignition is on),
press the
button on the remote.
A keyfob can be linked to each memory button.
If memory positioning is reset to a new location, it will be necessary to re-link the keyfob.
RECALLING A MEMORY SETTING FROM THE MEMORY PAD
With the ignition on and the shift lever in the P (PARK) position, press the position button (1 or 2 ).
FROM THE KEYFOB
If properly linked, operation of the
button will automatically return the driver’s seat, steering
column and outside mirrors to the memorized position.