Filter
Top Products
91
NAVMAN iCN 620 user manual
4 Press OK to display gridlines you are now in the manual Map Browser screen.
5 Use the 8-way toggle button to position the intersection of the gridlines over the DEPARTURE point that you
require. When the gridlines are over a street, the street name is shown along the bottom of the screen.
6 Press OK to select the location. The address details are automatically displayed.
7 Select START to program this location as your departure point.
8 You are then returned to the Map Browser screen. Press OK to display gridlines.
9 Again, use the gridlines to select the DESTINATION point that you require.
10 Press OK to select the location. The address details are automatically displayed.
11 Select GO to start the auto simulator.
12 To stop the auto simulator, press MENU/Power to return to the Main Menu. Select CANCEL ROUTE.
Press ESC at any
time to return to
the automatic Map
Browser screen.
If you dont want
to use the Map
Browser screen
to select your
destination, use
one of the other
methods described
in Section 7 Setting
Your Destination.