Filter
Top Products
61
NAVMAN iCN 620 user manual
5 Use the 8-way toggle button to position the intersection of the gridlines over the destination that you require.
When the gridlines are over a street, the street name is shown along the bottom of the screen.
6 Press OK to select a point as your destination. The address details are automatically displayed.
7 Choose one of the following:
Select GO. The unit will calculate the route and display the destination on the navigation screen.
Select START. This sets your chosen location as your departure point (normally your departure point is assumed
to be your present location). Refer to the following section Without a GPS Position Fix for more information.
Select SAVE. This will allow you to save the destination as a Shortcut or Favourite. Refer to Section 9/10
Programming Shortcuts/Favourites for more information.
Press ESC at any
time to remove
the gridlines, and
again to return to
the automatic Map
Browser screen.
Note: the START
option will only be
available if
the unit does not
have a current
GPS x.