Filter
Top Products
80
NAVMAN iCN 620 user manual
Each circle
represents a
satellite
Select ESC to return to the
previous screen
Performance of selected satellite.
ý
Satellite Positions
This screen shows you the position of each satellite in relation to the earth. You can check on the status and
performance of an individual satellite by selecting that satellite using the left/right toggle button. The performance of the
selected satellite is displayed as shown below.
Again, the satellites are displayed in different colours to represent the status of each.
Clear circle - No signal from satellite
Red circle - Signal being received from the satellite but not used in xing your position
Green circle - Good signal being received and satellite being used to x your position
Yellow satellite icon - This indicated the satellite whose information is being displayed