User’s manual NAVIGON 7310
Voice Control - 55 -
Note: Navigation instructions and warnings are muted for as long as the
navigation device expects to receive voice commands from you.
7.2 Help
Say only "Help" if you want to know which voice commands are
currently possible. In nearly all windows in which voice commands are
supported the navigation system will then tell you which commands you
can say in the current window.
7.3 Deactivation of the voice commands function
The voice commands function will be deactivated under the following
conditions:
► If you operate the navigation device with your finger while a voice
command is expected from you.
► If a call is received and during an active phone call if the navigation
device is being used as a hands-free module.
The voice commands function will be activated again as soon as a map
reappears.
7.4 Configuring the voice commands function
You can configure for which tasks you want to use voice commands.
► In the NAVIGATION window tap on Options > Settings > General >
Use Voice Control
.
Select the tasks for which you want to use voice control:
► Complete: You can use all the voice control functions.
► Answering: You can enter addresses and answer questions
asked by the navigation device.
► Entering Addresses: You can enter only destination addresses
with the voice control function.
Note: For details of how to enter the destination address using voice
commands refer to the chapter "
3Selecting the destination address by
voice command" on page
328.
The volume of the voice controls assistant can be controlled
independently of the volume of the navigation instructions. This means
you can still hear the speak prompts when you have muted the
navigation instructions.
1. In the N
AVIGATION window tap on Options > Settings > General >
Volume of the Assistant
.
2. Select the volume for the assistant.