Navigon 7310 GPS Receiver User Manual


 
User’s manual NAVIGON 7310
Navigation - 50 -
If no distance is indicated, all the obstructions which are reported for
your route and would lead to a loss of time will be avoided.
Tap on the Traffic Information box in order to open the TRAFFIC
INFORMATION window. (Refer to "3Displaying traffic information" on
page
361.)
Note: The calculation of detour routes to avoid reported traffic
obstructions can be performed automatically. (Refer to "
3TMC Settings"
on page
363.)
7 The Parking box appears when you are near your destination.
Tap on this box in order to select a car park near your destination
as your new destination.
8 Ahead of many junctions the information from points
39 and 310 is hidden.
Instead you are shown which lanes lead to your destination.
Tap on the box in order to hide the lane information.
9 The height above sea level and the current speed are shown here.
10 In the Total box you can see the distance remaining to the destination,
the estimated duration of the trip and the estimated time of arrival.
Tap on the arrival time if you want to see the estimated driving time
instead.
Tap once again on the info box if you want to see the estimated
time of arrival.
11 Your current position is indicated on the map (orange arrow). The
section of the map displayed changes continually so that your current
position is always in view on the map.
12 If you are navigating a multi-leg route, you will see the remaining
distance to the next interim destination and the estimated time of arrival
in the Next box.
Tap on the arrival time if you want to see the estimated driving time
instead.
Tap once again on the info box if you want to see the estimated
time of arrival.
13 The name of the route section that you need to drive onto next is shown
in the upper road box.
14 The name of the section you are currently driving on is shown in the
lower road box.
Note: The displays of many of the above mentioned areas can be
configured in Options
> Settings > Navigation. Some displays will only
function if the required information is available on the map.
Note: If you tap on the large arrow box, the current route instruction will
be repeated.