Filter
Top Products
User’s manual NAVIGON 7310
Voice Control - 54 -
Add to Route: Adds the selected point to the route planning as the last point.
Navigation will then continue to this point after you have reached the
original destination or the other route points.
Save
: Opens the SAVE DESTINATION AS... window. You can enter a name
under which the selected point will be saved in the F
AVOURITES list.
(Refer to "
3Saving destinations" on page 338.)
Search Nearby
: Opens the POI NEARBY window. Here you can search for
destinations near the selected point. (Refer to "
3POI nearby” page 329)
► Tap on (Destination search) or on (Back) in order
to quit Destination search mode. You will be returned to the
window from which you started this mode.
7 Voice Control
Note: The Voice Control function is not available in every language.
For languages in which this function is available, the Voice Control
button is shown in the N
AVIGATION window. For languages which are
not supported, the Voice Control
button is replaced by the Show Map
button.
Many functions of your navigation device can be called up conveniently
by voice command.
7.1 Use Voice Control
When the functions in a window can be called up by voice command,
this is indicated in the top left corner of the window by the symbol
(Voice control active).
A single signal tone and the symbol
(Speak) indicate that the
navigation system is waiting for your voice command.
► Say a command.
The positive acknowledgement tone sounds (two high-pitch tones)
and the function is executed.
If the navigation system has not understood your instruction or if you do
not say anything within a certain time, the negative acknowledgement
tone (two short low-pitch tones) will sound.
► Say the command again.
If the navigation system has not understood you after several
repetitions, the prompt "Say 'Help'" will appear.