Filter
Top Products
User’s manual NAVIGON 33xx | 43xx max
- 46 - Navigation
Save Route: Opens a window in which you can save the planned route under a
specific name. (Refer to "Saving routes" on page 41)
Saved Routes
: Opens a dialog window into which you can load a saved route.
Settings
: Opens the SETTINGS window. Here you can configure the navigation
system. (Refer to "Configuring the NAVIGON 33xx | 43xx max" on
page 61)
Sho
w on Map
: Shows the selected address on the map.
Simulation
: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Skip Route Point
: Tap this button to omit the next route point. This button is
active only when at least 2 route points still lie ahead of you. (Refer to
"Multi-leg routes" on page 39)
Touchscreen Cal
ibration
: The touchscreen can be re-calibrated if it responds
poorly to touch. Follow the instructions on the screen.
Traffic
: Opens the TRAFFIC INFORMATION window in which pending reports are
listed. (Refer to "TMC (Traffic Information)" on page 58)
Turn
-by-Turn List
: Shows detailed directions for the route, including all points at
which you must turn. (Refer to "Turn-by-Turn List" on page 56)
6.6 Working with the map
6.6.1 Selecting the navigation map
Each country has its own navigation map. Seamless navigation over
several maps on one continent is possible however if a continuous
route can be calculated with the maps saved on the device.
Even if maps of countries in other continents are available on the
navigation device, the NAVIGON 33xx | 43xx max can only ever work
with the maps of a single continent.
Tap in the N
AVIGATION window on Options > Settings > Map Display in
order to see which maps are currently in use. Here you can also select
a different continent if the navigation device contains any maps of
countries on other continents.
6.6.2 Map in Preview mode
You have entered a destination and tapped on Start Navigation.
- or -
You have planned or loaded a route and tapped on Show Route
.