Filter
Top Products
User’s manual NAVIGON 33xx | 43xx max
- 26 - Navigation
The ADDRESS window opens.
2. Enter the name or the postal code of the destination town.
3. Enter the name of the destination street.
4. Enter the house number. If you do not know the house number,
then leave this box empty.
If you don't know the house number but know the name of a nearby
side street, then tap on the Cross Street
box and enter the name of
this street. The navigation system will calculate a route to the
intersection of the streets you have entered.
The D
ETAILED INFORMATION ABOUT THE DESTINATION window opens.
Indicated on the Activate 'MyRoutes'
button is whether several route
suggestions are to be calculated (Yes
) or not (No).
► Tap on Activate 'MyRoutes' in order to change the setting.
5. Tap on Start Navigation
in order to navigate to the stipulated
address
- or -
Tap on Parking
in order to search for a car park near your
destination.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
► Tap on the address to which you want to navigate.
If the entered house number is not included on the map, the window
will show an address with the house number closest to the one
entered.
The map opens in Preview mode. The destination is indicated on the
map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 36. Please read on there.
Note: It is not necessary to enter all the address details. You can tap on
Start Navigation
before you get that far.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.