Mio A501 GPS Receiver User Manual


 
7-6 Camera
Camera Settings
Tap in the Camera mode to access related settings.
Item Name Description
Mode Sets the camera mode. The options are Auto
(default), Night, Sports, Indoor and Outdoor.
Flash Sets the flash mode. The options are On, Off and
Auto (default).
Resolution
Sets the resolution of the picture. The options are
1600X1200 (default), 1280X960, 800X600,
640X480 and 400X300.
Timer
Sets the delay time of the timer. The options are
5s, 10s and Off (default).
Continuous
Sets if you want to take continuous pictures. (See
the “Taking Continuous Pictures” section for
information.)
Storage
Location
Sets if you want to save the pictures on the
device or SD/MMC card.
Effect
Allows you to apply special effects on the
picture. The options are Normal (default), Sepia
and Mono.
Shutter
Sound
Sets the sound when the shutter button is
pressed.
Flicker
Control
Sets the flicker frequency to match that of the
fluorescent lamp.
GPS Stamp
When this function is enabled, you can add the
GPS positioning data into the picture you take.
(See the “Adding the GPS Stamp into the
Picture” section for information.)
Reset Restores all camera settings to the default values.