Filter
Top Products
506
Controls in detail
Useful features
Power outlet
The power outlet is located in the rear cen-
ter console.
̈ Switch on the ignition (୴ page 344).
̈ Flip up cover 1 and insert electrical
plug (cigarette lighter type).
Floormats*
1 Retainer pin
2 Eyelet
Removing
̈ Pull floormat off of retainer pins 1.
̈ Remove the floormat.
Installing
̈ Lay down the floormat in the respective
footwell.
̈ Press the floormat eyelets 2 onto re-
tainer pins 1.
i
The power outlet can be used to
accommodate 12V DC electrical accessories
(e.g. air pump, auxiliary lamps) up to a maximum
of 180 W.
If the engine is off and the outlet is being used
extensively, the vehicle battery may become dis-
charged.
Warning! G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using the eyelets and the retainer
pins.
Before driving off, check that the floormats
are securely in place and adjust them if nec-
essary. A loose floormat could slip and
hinder proper functioning of the pedals.
Do not place several floormats on top of
each other as this may impair pedal move-
ment.
i
To install or remove the floormat more easi-
ly, move the driver’s seat or front passenger seat
as far to the rear as possible (
୴ page 347).