Filter
Top Products
291
Control systems
Voice Control* telephone
“Dial number”
You can dial a phone number using the
command “Dial number”.
Digits from “Zero” to “Nine” may be used.
The phone number must be spoken
ț as a continuously spoken string of
digits, or
ț in digit blocks (three to five digits in
each block).
After each digit block (separate the digit
blocks by using an approximately 0.5 sec-
ond pause), the Voice Control System re-
peats the recognized digits and waits until
you continue speaking.
When dialing 1800 numbers, you may pro-
nounce the first four digits as “One eight
hundred” and the system will recognize the
spoken entries as “One eight zero zero”.
All other numeric entries must be spoken
as individual numbers.
Sample dialog:
s Dial number
t Please say the number
s One two three
t One two three
s Four five six seven
t Four five six seven
s OK
t Dialing
“Confirm”
Using the command “Confirm” will repeat
all digits spoken up to that point. Upon re-
peating the digits, the system will prompt
you to continue your input.
Sample dialog:
s Dial number
t Please say the number
s One two three
t One two three
s Confirm
t One two three, please continue
s Four five six seven
t Four five six seven
s OK
t Dialing
i
You can also dial the telephone number spo-
ken by pressing button s on the multifunc-
tion steering wheel (instead of using the
command “OK”):
You can dial the telephone number before all
numbers are recited in full.