Filter
Top Products
103
Control systems
COMAND FM/AM radio
Selecting channels using the channel
list
̈ Select “Audio” Ǟ “Audio” Ǟ “FM/AM
Radio” Ǟ “WB” Ǟ “Channel”.
or
̈ Press n when the main area is select-
ed.
The channel list appears. The dot R in
front of a list entry indicates the cur-
rently selected channel.
̈ Select channel by rotating ymz or
sliding qmr and press n.
Saving stations
You have the following options:
ț Saving stations manually
ț Saving stations using Autostore
Saving stations manually
Option 1
̈ Select “Audio” Ǟ “Audio” Ǟ “FM/AM
Radio” Ǟ “FM” or “AM”.
̈ Select “Radio ”Ǟ “Save Station”.
Option 2
̈ Press n when the main area is select-
ed.
Option 3
̈ Select “Audio” Ǟ “Audio” Ǟ “FM/AM
Radio” Ǟ “FM” or “AM”.
̈ Select “Presets”.
All three of these will call up a station pre-
set screen. The dot R in front of a preset
position indicates that the currently select-
ed station is saved there.
̈ Selecting a preset position:
Slide qmr or rotate ymz.
Saving a station to a selected preset po-
sition
If you have called up the station preset
screen using option 1:
̈ Press n briefly.
In options 2 and 3:
i
If you enter a frequency in the AM waveband
which is outside the frequency range, COMAND
tunes in to the next lowest frequency.
i
This function is only available for Weather
Band.
i
Twenty stations can be saved in each wave-
band except for Weather Band.