Filter
Top Products
142
Control systems
COMAND telephone*
̈ Select a number category to add,
e.g. “Home”.
̈ Select a telephone category to add,
e.g. “Land Line”.
̈ Select “Save”.
The search menu for COMAND address
book entries appears.
̈ Search for desired entry.
̈ Press n when you have finished
searching.
COMAND saves the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
selected number category.
If four numbers are saved for the entry
you are searching for, a prompt will ap-
pear asking whether you want to over-
write one of the existing numbers.
̈ Select “Yes” or “No”.
If you select “Yes”, a selection list will
appear containing the four existing
numbers.
̈ Select the number to be overwritten.
COMAND overwrites the selected num-
ber with the new data.
Incoming call
Rejecting or accepting the call
̈ Rejecting: Select “Reject”.
or
̈ Press t on the telephone keypad or
on the multifunction steering wheel.
̈ Accepting: Select “Accept”.
or
̈ Press s on the telephone keypad or
on the multifunction steering wheel.
or
̈ Press 0 on the multifunction steer-
ing wheel.
̈ Use the mobile phone (see mobile
phone operating instructions).
or
̈ Use the Bluetooth
®
headset
(see headset operating instructions).
If you have accepted the call using
COMAND, the telephone keypad, the mul-
tifunction steering wheel or the mobile
phone, the call will be conducted via the
hands-free system. The volume of the call
can be adjusted (
୴ page 96).
i
“Save” does not function if the selected list
entry is already saved in the COMAND address
book.
i
There is a detailed description of searching
for an COMAND address book entry in the
“Searching for an address book entry” section
(
୴ page 226).
i
If you have a CDMA/TDMA mobile phone
and reject a call, only the ring tone will stop. The
call itself can only be ended by the caller.
i
The use of a Bluetooth
®
headset requires
Bluetooth
®
to be activated and the Bluetooth
®
headset to be authorized (
୴ page 239).
୴୴