Filter
Top Products
81
Control systems
COMAND introduction
Instrument cluster multifunction
display
This section describes features and con-
trols via the COMAND controller, display
and shortcut buttons only.
Please refer to the “Instrument cluster
control system” section of this manual
(
୴ page 241) for function descriptions and
operation of the instrument cluster multi-
function display and multifunction steering
wheel buttons as they relate to COMAND
features described in this section.
Adjusting COMAND display and instru-
ment cluster illumination
1 To adjust instrument cluster illumina-
tion and multifunction display
2 To adjust COMAND display
̈ Brightening illumination: Turn
knob 1 or 2 clockwise.
̈ Dimming illumination: Turn knob 1
or 2 counterclockwise.
Swiveling COMAND display
1 Button for swiveling display to the left
2 Button for swiveling display to the right
You can swivel the COMAND display to the
left or right. The buttons are on the
right-hand side of the instrument cluster.
i
The layout of the menus may vary depending
on your vehicle’s equipment. This manual shows
the menus for a fully equipped vehicle.