Filter
Top Products
340
Controls in detail
Fastening the seat belts
1 Belt outlet
2 Latch plate
3 Buckle
4 Release button
̈ Pull the seat belt smoothly from the
seat belt outlet 1.
̈ Place the shoulder portion of the belt
across the top of your shoulder and the
lap portion across your hips.
̈ Push latch plate 2 into buckle 3 until
it clicks.
̈ If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
̈ To release the seat belt, press release
button 4 and guide latch plate back to
belt outlet.
Warning! G
Never ride in a moving vehicle with the seat
backrest in an excessively reclined position
as this can be dangerous. You could slide
under the seat belt in a collision. If you slide
under it, the belt would apply force at the ab-
domen or neck. That could cause serious or
even fatal injuries. The seat backrest and
seat belt provide the best restraint when the
wearer is in a nearly upright position and the
belt is properly positioned on the body.
Warning! G
Read and observe the additional warning no-
tices printed in the “Safety and Security”
section (
୴ page 44).