358
Controls in detail
Power windows
Vehicles with KEYLESS-GO*
1 Sensor surface on door handle
The SmartKey with KEYLESS-GO must be
located outside the vehicle within approxi-
mately 3 ft. (1 m) of a door.
̈ Close all doors.
Vehicles with tilt/sliding sunroof
̈ Touch and hold sensor surface 1 until
the windows and the tilt/sliding sun-
roof are completely closed.
̈ Release sensor surface 1 to interrupt
procedure.
Vehicles with panorama roof* and/or
rear side window sunshades*
̈ Touch and hold sensor surface 1 until
the windows and the tilt/sliding panel
are completely closed.
̈ Touch and hold sensor surface 1
again.
The roller sunblinds and/or rear side
window sunshades* close.
̈ Release sensor surface 1 to interrupt
procedure.
i
Make sure that you are only touching the
sensor surface.
i
Make sure that you are only touching the
sensor surface.
i
If you touch the sensor surface while one of
the front side windows is open and one of the
rear side windows is closed, for example, the
front side window will be closed as well as the
rear side window sunshade*.