Filter
Top Products
322
Controls in detail
Seats
Seat heating*
The buttons for seat heating are located on
the respective door. The red indicator
lamps on the button come on to show the
heating level selected.
1 Seat heating button
̈ Switch on the ignition (୴ page 315).
̈ Switching on: Press button 1 repeat-
edly until the desired heating level is
set.
One or more red indicator lamps on the
button show the selected heating level.
̈ Switching off: Press button 1 repeat-
edly until all indicator lamps go out.
Level
3 Three indicator lamps on
(highest level)
The seat heating automatically
switches to level 2 after approxi-
mately 5 minutes.
2 Two indicator lamps on
The seat heating automatically
switches to level 1 after approxi-
mately 10 minutes.
1 One indicator lamp on
(lowest level)
The seat heating automatically
switches off after approximately
20 minutes.
off No indicator lamp on
i
If one or more of the lamps on the seat heat-
ing button are flashing, there is insufficient volt-
age available since too many electrical
consumers are turned on. The seat heating
switches off automatically.
The seat heating will switch back on again auto-
matically as soon as sufficient voltage is avail-
able.