Filter
Top Products
53
Getting started
Parking and locking
Turning off with the SmartKey
̈ Turn the key in the starter switch to
position 0 and remove it.
The immobilizer is activated.
̈ Press the seat belt release button
(
୴ page 41).
̈ After exiting the vehicle press the lock
button
‹ on the remote control
(
୴ page 30).
The locking knobs on the doors move
down.
More information can be found in the
“Controls in detail” section (
୴ page 82).
i
Vehicles with automatic transmission:
The SmartKey can only be removed
from the starter switch with the gear
selector lever in position P.
!
With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.
Warning! G
To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.
Before closing doors, make sure that there
is no possibility of someone getting caught
in a door during closing.