Filter
Top Products
124
Controls in detail
Control system
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature:
Setting key dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each key (
୴ page 93).
̈ Move the selection marker with
the
æ or ç button to the
CONVE-
NIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SETTINGS KEY-DEPENDENT
.
The selection marker is on the current
setting.
̈ Press æ or ç to set key depen-
dency to
ON
or
OFF
.
Setting parking position for exterior rear
view mirror
Use the
MIRROR SETTING WHEN PARKING
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers, when reverse gear is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position ”
(
୴ page 140).
You can store a parking position for the
passenger exterior rear view mirror using
the memory switch (
୴ page 95).
̈ Move the selection marker with
the
æ or ç button to the
CONVE-
NIENCE
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
MIRROR SETTING WHEN PARKING
.
OFF
The easy-en-
try/exit feature
is deactivated.
STEERING COLUMN
Only the steer-
ing column is
moved.
STEERING COLUMN +
SEAT
Both the steer-
ing column and
the seat are
moved.