Filter
Top Products
284
Practical hints
Replacing bulbs
̈ Turn bulb holder 5 with bulb to the left
and pull out.
̈ Pull out bulb from the base (do not pull
on glass tube).
̈ Insert new bulb so that the base fits in
the bulb holder recess and is level.
̈ Place the bulb holder with bulb on the
headlamp mounting and turn bulb hold-
er to the right until it engages.
̈ Replace headlamp cover 2 and turn to
the right until it engages.
Front turn signal lamp bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 226).
̈ Turn bulb socket 1 to the left and pull
out.
̈ Push bulb into socket, turn to the left
and remove.
̈ Insert new bulb in socket, push in and
turn to the right.
̈ Reinsert bulb socket in lamp and turn
to the right.
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 226).
̈ Turn headlamp cover 2 to the left and
remove.
̈ Pull out the bulb socket 6 with the
bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Replace headlamp cover 2 and turn to
the right until it engages.