Filter
Top Products
283
Practical hints
Replacing bulbs
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 226).
̈ Turn headlamp cover 2 to the left and
remove.
̈ Pull out the bulb socket with the bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Replace headlamp cover 2 and turn to
the right until it engages.
Bi-Xenon* headlamps
1 Bulb socket for turn signal lamp
2 Headlamp cover for high beam head-
lamp
3 Headlamp cover for Bi-Xenon head-
lamp
4 High beam bulb
5 Bulb holder
6 Parking and standing lamp
High beam bulb
̈ Switch off the lights.
̈ Open the hood (୴ page 226).
̈ Turn headlamp cover 2 to the left and
remove.
i
If the inside of the headlamps is fogged
up, switch the lights on for a sufficient
amount of time.
Warning! G
Do not remove the cover 3 for the Bi-Xenon
headlamp. Because of high voltage in Bi-Xe-
non lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
୴୴