Filter
Top Products
35
Getting started
Adjusting
Seat height
̈ Press the switch up or down in the
direction of arrow 2.
Seat cushion tilt
̈ Press the switch up or down in the
direction of arrow 3 until your upper
legs are lightly supported.
Backrest tilt
̈ Press the switch forward or back in
direction of arrow 5 until your arms are
slightly angled when holding the steer-
ing wheel.
Head restraint height
̈ Press the switch up or down in the di-
rection of arrow 1.
Head restraint tilt
̈ Manually adjust the angle of the head
restraint. Push or pull on the lower
edge of the head restraint cushion.
More information can be found in the
“Controls in detail” section (
୴ page 89).
Folding the front seat backrest forward
1 Release lever
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
In addition to the front seat backrests,
the front seat cushions can also be
shifted forward to permit easy access
to the rear whenever the seat is located
in the rear half of its adjustment range.
Swivel backrest forward by pulling the
release lever until the seat moves in a
combined forward and upward move-
ment.