Filter
Top Products
302
Practical hints
Towing the vehicle
Installing towing eye bolt
1 Cover on right side of front bumper.
2 Cover on right side of rear bumper.
To remove cover:
̈ Press mark on cover in direction of ar-
row.
̈ Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the wheel well below the
trunk floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover and snap into place.