Filter
Top Products
178
Controls in detail
Audio system
Searching and selecting telephone book
entries by number
̈ Press the
NUM
key.
The current number is marked in the
display.
̈ Press either the d or c button.
The stored entries are selected accord-
ing to numerical order.
or
̈ Press the f or e button.
The stored entries are selected in in-
crements of 4 (e.g. Entry
M1
, Entry
M5
,
etc.).
Starting dialing process
̈ Once you have selected a number,
press the
SND
key.
Repeat dialing
If, for example, the number dialed is busy,
you can again place calls to the last 10
telephone numbers dialed using the repeat
dialing function.
Manual repeat dialing (redial)
̈ Press the
SND
key.
The last number dialed is shown in the
display.
̈ Select the desired telephone number
using the
d, c, f or e
button.
The abbreviation
L
and the number of
the entry are shown in the top line of
the display.
̈ When you have selected a number,
press the
SND
key.
The call will then be placed.
Automatic repeat dialing (redial)
If a call cannot be connected, press the
SND
key.
REDIAL
will appear on the display and re-
peated attempts to place the call will be
made for the next 4 minutes.
Quick dialing
̈ Enter the previously selected 3-digit
(1-999) number of the entry using the
number keys 1 to 0.
̈ Press the
RCL
key.
The telephone number stored under
that entry will be dialed.
̈ Press the
SND
key.
The call will be placed.