Filter
Top Products
112
Controls in detail
Control system
Operate the cassette player*
̈ Turn on the radio and select the cas-
sette player (
୴ page 160). Vehicles
with COMAND*: Refer to separate op-
erating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the cassette cur-
rently being played are shown in the
display.
1 Current side
̈ Press button j to fast forward to
the next track.
̈ Press button k to rewind the cas-
sette to the beginning of the current
track.
NAV menu
The
NAV
menu contains the functions need-
ed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until you see the message
NAV
in the
display.
ț If the navigation system is switched off,
the message
NAV OFF
is shown in the
display.
ț If the navigation system is on, the mes-
sage
NAV ACTIVE
is shown in the dis-
play.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Malfunction memory menu
Use the malfunction memory menu to scan
malfunction and warning messages that
may be stored in the system. What infor-
mation is shown in the display depends on
whether malfunctions have actually oc-
curred.
i
To select the reverse side of the tape,
press button below track number on
the audio system display, or enter re-
quest on the COMAND* system locat-
ed in the center dashboard.
Warning! G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages (
୴ page 252).