Filter
Top Products
9
Section 2:
Mapping Mode Operation
This section addresses the unit's Mapping Mode operation. Mapping
Mode includes all navigation features from finding the nearest restau-
rant to plotting a road trip across the country. Before you turn the unit
on it's a good idea to learn about the different menus and how they
work together. But if you just can't wait to get navigating turn to the
one-page Map Mode Practice Run on page 12.
iWAY 250c™ GPS unit.
The Power Button
The Power button turns the unit on and off and controls the backlight.
The unit has three preset backlight levels to select from. Repeatedly
pressing
POWER will cycle through the backlight settings and turn off
the backlight.
To turn the unit off − or enter Standby mode − press and hold the
POWER
key for 3 seconds. For complete details concerning Standby mode see
the discussion of power button functions in Section 4. If you find that
the unit has become unresponsive you can force it to shutdown by using
the stylus and pressing firmly on the button located at the bottom of
the unit. The button is recessed in a hole at the bottom of the unit.
Pressing this will force the unit to power off.
Using the Touch Screen
As mentioned earlier you will use the touch screen for most of the
iWAY's controls. You will see on-screen toolbars as well as menus and
textual lists that allow you to select a single entry.