Filter
Top Products
R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Wheel changing
195
The temporary use spare wheel must be
inflated to 60 psi (4.2 bar, 420 kPa) and
cannot be repaired.
Temporary use spare wheel, maximum
speed is 80 mph (50 km/h).
DSC must be on when the temporary use
spare wheel is in use.
LOCKING WHEEL NUTS
Note: A code number is stamped on the side of
the locking nut. Ensure the number is recorded
on the Security Card supplied with the
literature pack. Quote this number if a
replacement is required. Do not keep the
Security Card in the vehicle.
TIGHTENING THE WHEEL NUTS
Using the wheel nut wrench, lightly tighten the
wheel nuts alternately using the sequence
shown in the illustration.
Lower the jack and tighten the wheel nuts
alternately. Do not overtighten by using foot
pressure or extension bars on the wheel nut
wrench.
At the earliest opportunity have the wheel nuts
tightened with a torque wrench to 92 lb.ft (125
Nm).
This torque must not be exceeded.