Filter
Top Products
R
(FM8) SEMCON JLR OWNER GUIDE VER 1.00 NAS
LANGUAGE: english-NAS-en; MARQUE: jaguar; MODEL: XJ
Heating and ventilation
69
Recirculation may also be selected in AUTO
mode, if the climate control system detects
high levels of pollution in the atmosphere
outside the vehicle (if an air quality sensor is
fitted). Manual operation of the recirculation
control will override the automatic setting.
AIR QUALITY SENSOR
If the air quality sensor detects pollution, air
recirculation is selected automatically to
reduce pollutants entering the vehicle.
The sensitivity of the sensor can be adjusted
using the touch screen:
1. Select Settings from the Climate menu.
2. Touch the +/- buttons on the screen to
increase/decrease sensitivity.
To switch the function off, decrease sensitivity
to the minimum setting.
EXTERNAL TEMPERATURE
The external temperature is displayed at the top
of the Climate menu and in the instrument
panel.
When the external temperature is low enough
that ice may be present on the road, an amber
snowflake warning lamp will illuminate in the
instrument panel.
AUTOMATIC CLIMATE CONTROL
AUTO mode should be used as the normal
operating mode. The air conditioning, heating
and ventilation controls automatically provide
an optimum environment at the selected
temperature.
Note: Glass heating and timed air recirculation
may be selected in AUTO mode. Any other
manual adjustment cancels AUTO operation.
Note: Water expelled by the air conditioning
may collect underneath the vehicle when
parked. This is not cause for concern.
TEMPERATURE CONTROLS
The driver and three separate passenger zone
temperatures can be independently adjusted
using the rotary controls. Alternatively, using
the touch screen, touch the red button to
increase and the blue button to decrease
temperature.
The temperature for each zone is displayed on
the relevant (front or rear) climate menu.
Note: The maximum possible temperature
differential between the driver and passenger
settings is 5.4°F (3°C).
SEAT MENU BUTTON
HEATED SEATS
Note: The seat heaters will only operate when
the engine is running.
The heated seats are controlled through the
touch screen.
To access the heating controls for front seats:
• Press the seat menu button on the fascia.
• Or, select the seat icon on the touch screen
navigation bar.
• Or, from the Climate menu, select Front
seats.
To access the heating controls for rear seats
from the front touch screen:
• From the Climate menu, select Rear
climate, then select Rear seats.
To adjust the seat temperature:
• Touch the upper (red) or lower (blue)
arrow for the relevant seat repeatedly, to
select one of three temperature settings
(as indicated by the bars adjacent to the
arrows).
Press to access the front seat
heating, ventilation and massage
controls on the touch screen.