Garmin TRAILGUIDE GPS Receiver User Manual


 
2 Trail Guide
Owner’s Manual
E
N
GETTING STARTED > TUTORIAL
Tutorial
This tutorial guides you through the steps for finding a restaurant
in your area and then creating a route to it. If you have never used
a GPS unit before, try this simple task. You will see that using your
Trail Guide is fast and easy.
Make certain the antenna is unobstructed as it looks for satellites.
For example, it cannot establish a satellite fix if your vehicle is
parked in a garage. Position the antenna so that it is parallel to
the surface of the road so that it can have the best view of the sky.
Step 1: If you have not already done so, flip up the antenna and
snap your Trail Guide into the vehicle mount. See page 4 if you
need additional instructions. Turn on the Trail Guide. When the
unit has established a satellite fix, it displays a “Ready to Navigate”
message.
Step 2: Press the FIND key. The Find Menu appears. Highlight the
Food & Drink icon located in the Find Menu and press the
OK key.
FIND key
Rocker pad
OK key
Step 3: A list of restaurants in your area appears on a page similar
to the one shown below. Use the Rocker pad to highlight a
restaurant in the list. Then press the OK key.
Use the Rocker pad to
highlight a restaurant.
Map page