Filter
Top Products
22 Trail Guide
™
Owner’s Manual
E
N
BASIC OPERATION > PLANNING AND MODIFYING ROUTES
Saving a Route
Your Trail Guide automatically saves a route created with the
Route Planner. You can also save an active route during navigation
or after you have reached the destination.
To save an active route:
1. Press and hold the MENU key.
2. Highlight Save Route and press OK. Press OK again at the
verification window.
Your Trail Guide can hold up to 50 saved routes. If you save routes
prior to taking a trip, you only need to retrieve the appropriate route
and activate it as you prepare to leave.
The vehicle icon indicates
the route is active.
To select a saved route:
1. Press and hold the MENU key.
2. Highlight Route Planner and press OK. A list of your saved
routes appears.
3. Highlight the name of the route and press
OK. An
information page for your selected route appears.
4. To activate the route, highlight Navigate and press OK.
5. If you want to change the route by adding via points, use the
Rocker pad to highlight the Via Points box and press OK.
See “Adding Via Points” in this section for more information.
Deleting a Saved Route
You can delete a single route or all of the saved routes in your
Trail Guide.
To delete a route:
1. Press and hold the MENU key.
2. Highlight Route Planner and press OK. A list of your saved
routes appears.
3. To delete one route, highlight the name of the route. Use the
Rocker pad to highlight the red to the right of the route
name and press OK. Highlight Yes when the verification
window appears and press OK.
To delete all saved routes, press the MENU key. Highlight
Delete All and press OK. Highlight Yes when the
verification window appears and press OK.