Filter
Top Products
Trail Guide
™
Owner’s Manual 19
E
N
BASIC OPERATION > USING TRACBACK
Using TracBack
The Trail Guide records an electronic breadcrumb trail or “track
log” as you travel. As a result, you can retrace your recent
movements using the TracBack
®
feature. This feature is particularly
useful when navigational markers are not readily available.
The track log starts recording as soon as the Trail Guide gets a
location fix. For the best results, clear the track log before you start
traveling. When the track log is full, new track points overwrite the
oldest track points.
To use TracBack:
1. Press the FIND key, highlight Where Am I?, and press OK.
2. Highlight TracBack and press OK.
3. If you want to travel to the beginning of your track, highlight
Yes and press OK.
To select a spot along your track to travel to, highlight No
and press OK. Use the Rocker pad to select the point to
which you want to travel and press OK.
4. A TracBack Preference window appears.
Highlight the preferred method and press
OK.
If you have selected to follow roads (Faster Time or Shorter
Distance), the Trail Guide creates a turn-by-turn route to the
selected end point. Follow the route just as you would follow any
route.
If you selected to follow the track, you can use the Map page and
the Compass page to guide you along the path. See the next page
for more information about the Compass page.