Filter
Top Products
Trail Guide
™
Owner’s Manual 5
E
N
GETTING STARTED > TURNING THE TRAIL GUIDE ON AND OFF
Turning the Trail Guide On and Off
Press and hold the Power
key on the front of the unit to turn
it on or off. When turned on, the Welcome page appears briefly,
followed by a Safe Driving Warning Message. Press the OK
key to acknowledge the message, or wait briefly until the Map
page appears. Your Trail Guide automatically starts searching for
satellite signals to find your current location.
Turning off Satellite Reception for Indoor Use
You can set your Trail Guide to indoor use, which stops satellite
reception and conserves battery power. Thoroughly familiarize
yourself with the routing features of the Trail Guide by
simulating routes.
To turn off satellite reception:
1. Press the Page
key to open the Map page.
2. Press the MENU key.
3. Highlight Use Indoors and press OK. GPS is disabled.
To turn on satellite reception:
1. Press the Page
key to open the Map page.
2. Press the MENU key.
3. Highlight Acquire Satellites and press OK. GPS is
enabled, and your Trail Guide begins to acquire satellite
signals.