Filter
Top Products
Trail Guide
™
Owner’s Manual 33
E
N
CUSTOMIZING YOUR TRAIL GUIDE> CUSTOMIZING THE MAP PAGE
CUSTOMIZING YOUR TRAIL GUIDE
You can adjust the Trail Guide’s settings to suit your needs. You
can make most changes through the Settings page. Access this page
by pressing the MENU key once and then selecting Settings. You
can also access it by pressing the MENU key two times.
Your Trail Guide’s factory settings (or default settings) do not need
to be changed in order for your unit to function.
Customizing the Map Page
You can customize the way information appears on the Map page.
Press MENU twice, highlight Map Setup, and press OK. A Map
Setup page appears, which features six sections.
Layout Tab
Navtext—displays or hides the
navigational text.
Turn Pointer—
displays or hides
the turn pointer that appears
on the Map page when you are
navigating.
Data fields—displays or hides data fields on the Map page. If you
choose to hide the data fields on the Map page, the turn pointer
appears in the lower right-hand side of the page.
Map Tab
Map Detail—adjusts the amount of detail that is displayed on your
Map page. A higher detail level causes the map to redraw slowly.
For everyday use, keep the view level set to Normal.
Orientation—North Up displays the map with North at the top.
Track Up rotates the map so your current direction of travel is at
the top of the page. See page 29 for more information.
Road Lock—when On, the Trail Guide places the position icon on
the nearest road. Select Off when you are not traveling
on roads.