Filter
Top Products
16
Setup Map — ‘Waypoint’ Tab
The ‘Waypoint’ Tab contains the Waypoint, and Active Route Waypoint
option settings. Each of the options has a ‘Text’ and ‘Zoom’ setting. To
change a setting, highlight the appropriate fi eld then press ENTER. Make
your new selection, then press ENTER to accept the selection.
Waypoints —
This option sets the display parameters for all waypoints.
Active Route Waypoint —
This option sets the display parameters for
waypoints that are in an Active Route. As an example, if you have selected
‘Small’ as the text option for all waypoints, but selected ‘Large’ as the setting
for Active Route Waypoints, the waypoints included in an Active Route will
be displayed with large text on the Map Page.
Setup Map — ‘Point’ Tab
The ‘Point’ Tab contains the Navaids, Points of Interest, Geo, and Exit option
settings. Each of the options has a ‘Text’ and ‘Zoom’ setting. To change a
setting, highlight the appropriate fi eld then press ENTER. Make your new
selection, then press ENTER to accept the selection.
Navaids —
are items displayed on the Map that aid navigation. Navaids can
be landmarks, milemarkers, hazards, light houses, buoys etc.
Points of Interest —
include general business listings such as restaurants,
hotels, gas stations, etc..
Geo —
include points such as schools, cemeteries, churches, towers, glaciers,
parks, etc.
Exit —
includes exit information for the US and Canada.
Setup Map — ‘Waypoint’ Tab
Setup Map — ‘Point’ Tab
Map Page Options
Reference
190-00249-00_0C.indd 16 5/7/2003, 9:54:39 AM