Filter
Top Products
56 GPSMAP 76CSx Owner’s Manual
MAIN PAGES > ALTIMETER PAGE
Plot Over Time (Distance)
These two measurement options (changes over a set
period of time or changes over a set distance) apply
only to the View Elevation Plot option. The View
Pressure Plot option is measured by time and pressure
only. When one option is active, the other is shown on
the Altimeter Page Options Menu.
Elevation over
Distance plot
Pressure over
Time plot
View Pressure/Elevation Plots
Select the View Elevation Plot option to plot a profile
of elevation changes that occur as you navigate over
a set distance or period of time. Select View Pressure
Plot to view a record of changes in barometric
pressure for a set period of time. When one option
is active, the other option is shown on the Options
Menu.
To view elevation or pressure plots:
1. Use the ROCKER to select the option you
want from the Altimeter Options Menu, and
press ENTER to show the plot.
2. Adjust time and distance measurement using
the Elevation Plot Zoom Ranges explained on
following pages.
3. To clear the plot and start again, you must
clear the Track Log.