Filter
Top Products
50 GPSMAP 76CSx Owner’s Manual
MAIN PAGES > COMPASS PAGE
To calibrate the electronic compass:
1. Press MENU to open the Compass Page
Options menu
2. Highlight Calibrate Compass, and press
ENTER to open the Calibration Page.
3. With the Start button highlighted, press
ENTER, and follow on-screen directions for
holding and turning the unit.
A message appears notifying you to adjust
your turning speed as needed. Hold the unit
level while turning.
A “Calibration Successful” message appears
when finished.
If a “Calibration Failed” message appears,
repeat the process.
4. Press ENTER to return to the Compass Page.
Compass Page Options
Use the options menu to customize the Compass
Page. With the Compass Page open, press MENU. To
select an option, highlight it, and press ENTER.
Compass Page
Options Menu
The following options are available:
Sight ‘N Go—aligns the pointer with the sighting
mark (on the case above the screen) and the
destination you can see in the distance.
Stop (Resume) Navigation—stops or starts
navigation to your destination. This option is not
available if you do not have an active go to or route.