Garmin 178, 178C GPS Receiver User Manual


 
59
Reference
Route List Page
2. Highlight the route you wish to navigate and press ENTER.
3. Choose ‘Activate’ or ‘Invert and Activate’ and press ENTER. (‘Activate’ uses the route as is. ‘Invert and
Activate’ reverses the route then activates it.)
To deactivate (stop navigation) of a route:
1. Press the NAV key, highlight ‘Stop Navigation’ and press ENTER.
Route List Page
The GPSMAP 178/178C Route List Page (‘Route’ tab of the Main Menu) displays all the routes cur-
rently stored in memory, along with a descriptive name for each route. By pressing MENU while on the
Route List Page, the following menu options appear: ‘New Route’ (page 57), ‘Copy Route’, ‘Delete Route’,
or ‘Delete All’.
To select and follow a route:
1. On the Route List page, use the ARROW KEYPAD to highlight the desired route and press NAV.
2. With ‘Follow <route name>’ highlighted, press ENTER. Highlight ‘Activate’ or ‘Invert and
activate’ and press ENTER.
To deactivate (stop following) the route:
1. Press the NAV key, highlight ‘Stop Navigation’ and press ENTER.
To copy or delete a route:
1. From the Route List, using the ARROW KEYPAD, highlight the route you want to copy or delete and
press MENU.
2. Choose either ‘Copy Route’ or ‘Delete Route’ and press ENTER and with ‘OK’ highlighted, press
ENTER again to confirm a deletion. Copy uses the same route name with an additional number, start-
ing at 1, at the end of the route name.
To delete all routes:
1. From the Route List, press MENU.
2. Highlight ‘Delete All’ and press ENTER. With ‘OK highlighted, press ENTER again to confirm.
If you highlight a route name from
the Route List and press NAV, the
name automatically appears.
Route List Options Menu