Filter
Top Products
Once a route has been activated, the Active Route
Page will appear, displaying the waypoint sequence
of your route with the estimated time enroute (ETE)
at your present speed and distance to each way-
point. As long as you are navigating an active route,
the Active Route Page will become part of the main
page sequence of the unit.
The Active Route Page will also allow you to
change the ETE field to display desired track (DTK)
or estimated time of arrival (ETA) for each leg. You
can also clear or invert the active route. To display
DTK or ETA for each leg:
1. Highlight the estimated time enroute (ETE) field
and press the
E
key.
2. Use the
U
or
D
keys to select ‘DTK’ or ‘ETA’
and press the
E
key.
To invert a route from the Active Route Page:
1. Press the
U
key once to move the field highlight
to the ‘invert’ field.
2. Press the
E
key to invert the route.
To clear the active route from the Active Route
Page and stop route navigation:
1. Use the
U
and
L
keys to select the ‘clear’ fie l d .
2. Press the
E
key to clear the active route.
Once a route has been created and stored in the
GPS 40, it can be edited at any time, even if it is the
active route. To edit a route from the Active Route
Page or the route submenu page:
1. Use the
U
and
D
keys to select the waypoint
you want to edit and press
E
.
An on-screen menu of editing choices will
appear, with options for reviewing, inserting, delet-
ing or changing the waypoint field highlighted. Use
the
U
and
D
arrow keys to select among the
editing choices.
31
Reference
Active
Route Page
40 rev B 8/6/98 1:47 PM Page 31