Garmin 182 GPS Receiver User Manual


 
77
Appendix D
Messages
The GPSMAP 182/182C/232 uses an on-screen pop-up message system to alert you to unit operat-
ing characteristics. Press the ENTER key to acknowledge and return to the page you were viewing.
Alarm Clock— The alarm clock has sounded.
Anchor Drag Alarm— You have drifted out of the specifi ed distance range.
Antenna Input Shorted To Ground— Check antenna wiring/connections or antenna replacement.
Approaching Waypoint— You are a specifi ed alarm distance from a destination waypoint.
Arrival At Waypoint— You have arrived at the destination waypoint.
Basemap Failed Unit Needs Repair— Internal problem with unit. Contact your dealer or Garmin
Customer Service (pg. iv) to have the unit serviced.
Database Error— Internal problem with unit. Contact your dealer or Garmin Customer Service (pg.
iv) to have the unit serviced.
Lost Satellite Reception— The unit has lost satellite signals. Check antenna connections or try
moving to a location with a clear view of the sky.
Memory (RAM) Failed Unit Needs Repair— Internal problem with unit. Contact your dealer or
Garmin Customer Service (pg. iv) to have the unit serviced.
Memory (ROM) Failed Unit Needs Repair— Internal problem with unit. Contact your dealer or
Garmin Customer Service (pg. iv) to have the unit serviced.
No DGPS Position— No differential correction data is available or not enough data is available to
compute a DGPS position.
Off Course Alarm— You have exceeded the specifi ed off-course distance.
Processor Failed Unit Needs Repair— Internal problem with unit. Contact your dealer or Garmin
Customer Service (pg. iv) to have the unit serviced.
Proximity Alarm List is Full— You have used all ten proximity waypoints.
Proximity Alarm Waypoint— You have entered the alarm radius for the proximity waypoint
indicated.
182C Manual Part 2.indd 77 6/4/2003, 2:54:27 PM